The Stiebel Eltron DHC 3-1 Electric Tankless Water Heater is designed for installation at the point of use. They heat water instantaneously as it flows through the unit. Stand-by losses are completely eliminated. The heating elements are controlled by a flow switch and by an exclusive scald-guard thermostat, which keeps the water temperature within safe limits at all times. In addition, the DHC water heaters are equipped with a safety high-limit with manual reset. The rugged all copper design ensures many years of reliable service. The models DHC 3-1, DHC 3-2 and DHC 4-2 are shipped with 0.5 GPM pressure compensating flow reducer/aerators that fit on most faucets. Flow controls and faucet aerators are highly recommended in conjunction with tankless water heaters.Stiebel Eltron DHC 3-1 Electric Tankless Water Heater Features: Up to 50% less electric consumption compared to storage type heaters, hot water instantly, with exclusive built-in scald guard thermostat, fits anywhere due to its lower installation cost in comparison to storage type water heaters. No need for circulating pumps! For 120v. Stiebel Eltron DHC 3-1 Electric Tankless Water Heater Specifications:; Phase1, 120V, 3.0 KiloWatts, 25 Amps; Minimum required circuit breaker size 30 Amps; Recommended wire size AWG Copper 10; Minimum water flow to activate unit 0.32 GPM/1.2 l/min.; Pressure loss in unit 2.88 PSI/0.23 bar; Maximum working pressure 125 PSI/10 bar; Tested to pressure 250 PSI/20 bar; Water connections 1/2" NPT; Dimensions: H 14-3/16" x W 7-7/8" x D 4-1/8"

SIEBEL T/LESS WATER HEATER DHC12

 Up to 50% less power consumption compared to storage type heaters  Hot water instantly  Hydraulically controlled for quiet operation  Resettable safety high limit switch  Lower installation costs compared to tank type units  Exclusive copper-clad heating element  Never dry fires and fails prematurely  Superior reliability  Available in many different kW sizes  Available for 120 V, 208 V, 240 V, and 277 V   Hot water where you need it Stiebel Eltron DHC tankless water heaters are designed for installation at the point-of-use. The DHC heats water instantaneously as it flows through the unit. Stand-by heat losses are completely eliminated. DHC Point-of-Use Under Sink Installation Ultra-reliable performance DHC Heating Element The heating element is controlled by a flow switch which means a DHC can never dry-fire and fail prematurely. And since all DHCs are hydraulically controlled, operation is quiet. DHC water heaters are equipped with a safety high-limit with manual reset. The rugged all copper design ensures many years of reliable service. Easy to Size for Point-of-Use Applications Sizing Guide Map DHC can deliver warm or hot water to a single point-of-use, usually a hand wash or utility sink. Click the map for the full Sizing Guide. Call Stiebel Eltron at 800.582.8423 if you have any sizing questions, or if you have any out-of-the-ordinary situation. Stiebel Eltron service representatives can make recommendations on sizing, or provide assistance with our water heaters, to both homeowners and professional installers. Low flow = big savings Save Energy Water Money Space DHC 3-1, DHC 3-2 and DHC 4-2 models are shipped with 0.5 GPM pressure compensating flow reducer/aerators that fit on most faucets. Flow controls and faucet aerators are highly recommended in conjunction with tankless water heaters. No pressure relief valve, drains, or circulating pumps needed. Applications DHC Internal View Labeled The Stiebel Eltron DHC tankless water heaters are ideal for restrooms or kitchenettes in an office or commercial / industrial setting:  Office Buildings  Gas Stations  Stores  Schools  Malls  Hotels / Motels  Warehouses  Commercial Condominiums  Restaurants  Manufacturing Facilities In a residential setting, they are suited for the following applications:  Bathroom Sinks  Kitchen Sinks  Laundry Areas  Small Cabins  Boats / RVs

Stiebel Eltron Tempra 24 Plus Tankless Water Heater (239222) Features: Unit Provides 92F rise in water Temperature at 1GPM 75F Rise at 2GPM 54F Rise at 3GPM 41F Rise at 4GPM This unit is desiged to work in cold areas where smaller units will not work. This unit will heat an average 2000sqf 3Bed 2Bath home, it will provide for 2 heavy water use applications at once, This means 2 showers can be taken at a time or other heavy uses, including tub filling which the smaller units just can’t do.(Depending on ground water temperature) Water temperature can be adjusted. Unit will not produce water over 140F with built in safety guard. Can produce hot water virtually endlessly, no more cold showers Reduces hot water costs up to 60% over conventional electric water heaters Digital Temperature Display Hinged Cover for easy access Installation is quick and easy, requiring no venting or pressure relief valves, the compact size allows installation almost anywhere. This power control system analyses the data and manages power usage for maximum efficiency and temperature stability. At rest, the unit uses no power at all. Can be used with hard, soft, city or well water. Made in Germany. 3 Year Warranty on parts and workmanship Specifications: Dimensions: 14 9/16” W x 14 1/2” H x 4 5/8” D Weight: 18 Pounds Materials: All Copper Internals Water Connections: 3/4” NPT with built in shut-off valve Voltage: 240V/208V Wattage: 24kW/18kW Amperage: 2 x 50A Breaker Requirement: 2 x 50A Recommend Wire Size: 2 x 8/2 AWG Energy Efficiency: Up to 99.5% Maximum Gallon Per Minute Recommanded by Manufacturer: 8 GPM

Features:
The new generation of water heater design
Attractive design
Anti-scald system with automatic thermostat cut-out
5-in-1 chrome shower wand & accessories
Works in areas with low water pressure
Maintenence-free copper heating system
220-240 V models include extra ELSD protection against electicity leakage
Splash-proof (IP25)
Easy and safe operation

SIEBEL T/LESS WATER HEATER 4-2 M

SIEBEL T/LESS W/HEATER TEMPRA 15

tiebel Eltron Tempra 20 Trend Tankless Water Heater (239215)

Features:

Unit Provides 88F rise in water Temperature at 1.5GPM, 58F Rise at 2.25GPM, and 44F Rise at 3GPM
This unit is desiged to work in cold areas where smaller units will not work.
Water temperature can be adjusted. Unit will not produce water over 130F with built in safety guard.
Can produce hot water virtually endlessly, no more cold showers
Reduces hot water costs up to 60% over conventional electric water heaters
Installation is quick and easy, requiring no venting or pressure relief valves, the compact size allows installation almost anywhere.
This power control system analyses the data and manages power usage for maximum efficiency and temperature stability. At rest, the unit uses no power at all.
Can be used with hard, soft, city or well water.

Dimensions: 14 9/16" W x 14 1/2" H x 4 5/8" D
Weight: 18 Pounds
Materials: All Copper Internals
Water Connections: 3/4 NPT, with built in shut-off valve
Voltage: 240V / 208V
Wattage: 19.2kW / 14.4kW
Amperage: 2 x 40A / 2 x 35A
Breaker Requirement: 2 x 40A / 2 x 35A
Recommend Wire Size: 2 x 8/2 AWG
Energy Efficiency: Up to 99.5%
Maximum Gallon Per Minute Recommanded by Manufacturer: 8 GPM

POW/STAR TANKLESS HEATER WH17

The Bosch 12 kW tankless water heater is a point-of-use water heater that helps eliminate long waits for hot water. Ideal for isolated sink locations in a home, office, warehouse or service station. A copper heat exchanger, 98% efficiency and the ability to heat only the water you use mean that you save water, energy and money. Units are compact with flexible installation configurations. 240 - VOLT

P/S TANKLESS WATER HEATER US3

Bosch Tronic 3000 240-Volt 9.5-kW 1.5-GPM Point of Use Tankless Electric Water Heater

The Solar Dynamics Hot Water System is built with the industry0s largest diameter copper headers, and state of the art 0fusion-bonded0 copper fin-tube waterways.

Fusion bonding eliminates the need for solder; producing the most rapid absorption and transfer of the solar energy. That is why the Solar Dynamics Hot Water System is the hottest, guaranteed!

The new Solar Dynamics exclusive extruded aluminium collector cabinetry, with the 0storm secure 0mounting hardware, and safety tempered glass is the leader in protection against storm and hurricane force winds.
Its hot water storage tank is built with an internal porcelain enamel coated inner tank to ensure fresh, clean water quality. The tank0s internal magnesium anode provides cathodic protection to ensure the longest tank life. You can be sure that the new Solar Dynamics storage tank0s porcelain enameled internal coating has not undergone any change through welding.

Solar Dynamics production technologies ensure the longest system life with the highest temperature. The Florida Solar Energy Centre (FSEC) tests confirm the energy absorption at 863.5 Btu per square foot of collector and lowest heat loss at 3.2 Btu heat loss per hour (as compared to 6.2 of another system). Designed for safe use, each collector is covered with Safety Tempered Glass.
All aluminum cabinetry ensures the longest life in all weather conditions. Magnesium Anode provides cathodic protection to extend the life of the Solar Dynamics storage tank.
100% Polyurethane Insulation retains the maximum heat of the stored hot water for later use.
The highest performance: 863.5 Btu per sq ft of collector
The lowest heat loss: 3.2 Btu per hour
Full fusion bonded /Mechanical bond
Temperature Guarantee: Selective surface collector coating ensures the maximum heat absorption while reducing emissivity. The result is the delivery of the promised temperature by Solar Dynamics.

The Solar Dynamics Hot Water System is the value leader, providing the longest life,

S/D 80GAL SOLAR HEATER #8042

S/D 65GAL SOLAR HEATER #6525